CM-7436 Series: 4.5" Wide Models CM-7536 Series: 6" Wide Models
COLUMN(tm) Push Plate Switches
|
|
CM-75 Series Column™ ADA compliant push plate switches are easy to install (wired or wireless), easy to activate (from any angle) and provide years of trouble free operation.
Column™ switches now available with Hands Free Sensor!
|
|
|
|
|
CM-74 & CM-75 Series Column™ switches offer greater user convenience and lower installation costs by providing a single activation device in place of two high/low switches, as required by a growing number of building codes across North America. These Column™ switches feature solid aluminum or stainless steel construction and are available in a range of finishes. Also available is the option for Kinetic by Camden™ no-battery wireless or Lazerpoint™ battery powered wireless transmitters. The VR Series Column™ switches with hands-free sensors use active infra-red technology to eliminate the spread of germs. - Kinetic™ no-battery wireless now available on CM-7536 series Column™ switches. Not available on 9" tall models.
- DPDT switch option not available. Use Camden CX-IRB relay if required.
|
|
|
|
|
| • |
Low profile contoured design with easy activation from side angles
|
| • |
Meets or exceeds California building code, section 1117B.6 requirements
|
| • |
Over 94 square inches total activation area
|
| • |
(2) Fully redundant SPDT, 15 Amp. UL listed switches
|
| • |
Choice of aluminum switch with clear, dark bronze or blue architectural finishes and stainless steel
|
| • |
Choice of 4 different stock graphics
|
| • |
Optional 'snap-in' Lazerpoint RF™ wireless transmitters
|
| • |
Adjustable leveling screws for easy installation on uneven walls
|
| • |
No internal wires exposed to moving parts
|
| • |
IR Sensor provides stable and reliable operation
|
| • |
Red/green light ring with switch or remote activation
|
| • |
Adjustable sensor range 2" to 8" (5cm to 20cm)
|
| • |
Adjustable sensor time delay (0.5 sec. to 20 sec.)
|
| • |
Weather/water resistant sensor, IP65 rated
|
|
|
| Contact Type: |
Common / N.O. / N.C. |
| Voltage: |
N/A |
| Voltage: |
12-24 VDC +/- 10% |
| Contact Type: |
SPDT Momentary, Form 'C' |
| Contact Rating: |
15 Amps @ 30 VDC |
| Contact Rating: |
1 Amp @ 30VDC |
| Dimensions: |
5-7/8"W x 10-5/8"H x 1-1/2"D
(150mm x 270mm x 38mm) |
| Dimensions: |
5-7/8"W x 37-1/2"H x 1-1/2"D
(150mm x 953mm x 38mm) |
| Dimensions: |
5-7/8"W x 37-1/2"H x 1-1/2"D
(150mm x 953mm x 38mm) |
|
|
|
|
|
Models
|
Wired Manual Switches
|
| CM-7436 |
 |
36" Column™ push plate switch, anodized aluminum finish. Option for dark bronze finish
|
|
| CM-7536 |
|
36" Long Column™ push plate switch, anodized aluminum finish. Option for dark bronze or blue anodized finish. Option for Lazerpoint™ battery powered wireless, receiver required.
|
|
| CM-7536SS |
|
36" Long Column™ push plate switch, stainless steel. Option for Lazerpoint™ battery powered wireless, receiver required.
|
|
Wired Manual Switches with Hands-Free Sensor
|
| CM-7436VR |
|
36" Column™ Push Plate Switch With Hands-Free Sensor, Anodized Aluminum, Option for Bronze Finish
|
|
| CM-7536VR |
|
36" Long Column™ Push Plate Switch With Hands-Free Sensor, Anodized Aluminum Finish. Option for Dark Bronze or Blue Anodized Finish.
|
|
| CM-7536SSVR |
|
36" Long Column™ Push Plate Switch With Hands-Free Sensor, Brushed Stainless Steel, US32 / 630
|
|
No Battery Wireless Switches with Transmitter
|
| CM-7536K |
|
6" Wide, 36" Long Column™ push plate switch, aluminum, w/ built-in Kinetic™ no battery wireless transmitter, receiver required.
|
|
| CM-7436K |
|
4.5" Wide, 36" Long Column™ push plate switch, aluminum, w/ built-in Kinetic™ no battery wireless transmitter, receiver required.
|
|
| CM-7536SSK |
|
6" Wide, 36" Long Column™ push plate switch, stainless steel w/ built-in Kinetic™ no battery wireless transmitters, receiver required.
|
|
|
|
You are currently viewing the mobile layout.
Click here for our desktop layout.
|
